PartPro300 xT
Thermoplastic Engineering
Special Pricing for Research & Education
Excellent Print Quality is Ensured by a Heated Chamber
Excellent Print Quality is Ensured by a Heated Chamber
For outstanding performance on complex shapes, the heated chamber maintains a constant printing temperature.
Large-area continuous printing without interruption.
Two 3kg rolls capacity extends ease of use and change over intervals. Y tube connector can replenish the filament immediately if ran out of the filament from one side.
Nozzle made of harden steel.
Advanced material use and quality results are enabled by a high-temperature hardened steel nozzle. High quality, precise parts are ensured by advanced auto leveling and calibration.
Guard for rotary switches
The Thumb Rotary Switch Guard is a printed item that can be tailored for different drivers, glove types, and even track type, with fine tolerances, thanks to PartPro300 xT.
Cylinder head
3D printing prototypes reduce the time it takes to evaluate and enhance a product before it is mass-produced by allowing users to use larger printers for larger outputs.
PartPro300 Software
XYZprint AMFFF
PartPro300 xT Printing Properties
Build Volume | Duel: 195 x 270 x 300 mm Single: 295 x 300 x 300 mm |
Layer Resolution | 50-700 micron |
Build Speed | 300 mm/s |
XY Positioning Accuracy | 12.5 micron |
Print Bed Temperature | 100°C / 212°F |
Max. Heating Chamber Temp. | 70°C / 158°F |
Printing Resuming | Yes |
Air Filtering | Yes |
Build-in Camera | Yes |
Power Requirement | 100V - 240V 550W |
Operation Temperature | 20 - 35 °C / 68 - 95°F |
Operation Humidity | 30 - 60 % RH (No Condensation) |
Storage Temperature-Resin | 10 - 40°C / 50 - 104°F |
Engraving Area | 285 x 285 mm (11.2 x 11.2 inch) |
Laser Engraving | Optional |
Laser Wavelength | 406 nm + 8 nm / - 6 nm lnGaN |
Output Power | 300 mW ± 10 |
Product Dimensions (W x D x H) | 540 x 610 x 733 mm (21.3 x 24.0 x 28.8 inch) |
Product Weight | 41.6 kg (91.5 lbs) |
Connectivity | Wireless / Ethernet / USB 2.0 Cable / USB Flash Drive (FAT32) |
Material Compatibility | ABS / PLA / PETG / BVOH / Tough PLA / *XYZ Carbon Fiber / *Premium Metallic PLA / *PC (*Harden Steel Nozzle Required) |
Operating System | Windows / macOS |
Supported File Formats | .stl / .3mf / .obj / .igs / .stp / .ply / .amf / .3cp / .nkg / XYZ Format (.3w) |
Supported Image Formats | .jpg / .png / .gif / .bmp |